DescriptionThe 3500/22M Transient Data Interface (TDI) is the interfacebetween the 3500 monitoring system and compatiblesoftware (System 1 Condition Monitoring and Diagnosticsoftware and 3500 System Configuration software). The TDIcombines the function of a 3500/20 Rack Interface Module(RIM) with the data collection capability of a communicationprocessor such as TDXnet.The TDI resides in the slot ...
DescriptionThe 3500/15 AC and DC Power Supplies are half-height modules andmust be installed in designated slots on the left side of the rack. The3500 rack can contain one or two power supplies with any combinationsof AC and DC. Either supply can power a full rack.When two power supplies are installed in a rack, the one in the lowerslot acts as the primary supply, and the other in the upper slot a...
The NDSC-01 61298487 is Inverter control board.The board is having critical spare parts on-hand which can significantly reduce the downtime associated with excitation maintenance, forced outages, electrical and mechanical failures. As a minimum for operational reliability, it is essential to have critical spare parts and components readily available. High accuracy time tagging. Defined outpu...
The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet.The TDI resides in the slot adjac...
ABB DSQC series robot spare parts FOXBORO FBM series TRICON (EX) 3805E, 3503E, etc WEISTINGHOUSE (Westinghouse) Emerson 1C beginning series AB (Rockwell) 1747/1756/1784/1785 series AB//RELIANCE Ryan ABB//BAILEY Power module MOTOROLA MVME series SCHNEIDER 140 series AS beginning series KOLLMORGEN SIEMENS MOORE SIEMENS (Siemens old model, discontinued spare parts) (DCS system) and (robot system) and...
Decentralized control system is a new generation of instrument control system based on microprocessor, which adopts the design principle of decentralized control function, centralized display operation, taking into account division, autonomy and comprehensive coordination. The distributed control system is referred to as DCS, which can also be translated as "decentralized control system" or "distr...
The 3500 Transient Data Interface (TDI) is the interface between the 3500 monitoring System and the Bentley System 1TM machine management software. TDI combines the capabilities of 3500/20 Framework Interface Modules (RIM) and communication processors such as TDXnet. The TDI runs in the RIM slot of the 3500 frame and is used in conjunction with the M Series monitor (3500/40M, 3500/42M, etc.) to co...
The IC695ALG600 is an analog input module, consisting of 8 analog input channels that account for 16 memory addresses in GEPAC, such as AI1-- AI16, with two addresses assigned to each channel. Each channel has a data type of 16-bit integer and 32-bit floating point, if it is an integer, each channel occupies the previous memory address of each channel, if it is a floating point data, each channel ...
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN
+86 18965423501
sales7@amikon.cn
IPv6 network supported | Sitemap | XML | Blog | Privacy Policy | Terms And Conditions
