We believe that professional knowledge is priceless. With over 10 years of supply chain experience and sales team, we can help you solve or avoid problems that threaten your business. We not only have a large inventory, but our team also ensures that every device is in working condition. Your purchase is also supported by our 90 day repair/replacement/refund warranty. Time is money, especially whe...
Preventive maintenance is very important and should be part of any outdated plan, but surprisingly, not everyone can benefit from it. Read about the main tips for reducing downtime. Ensure that the cooling fan is free of dust and rotates freely on the drive, PLC and cabinet to prevent overheating Check the status of the backup battery in the PLC and replace it every six months Backup! Backup! Back...
Undoubtedly, the most popular form of installation is to centrally install the VSD in the control cabinet. The advantage of centralized control cabinet technology lies in the protected installation of equipment and centralized access to them for power supply, control, maintenance and failure analysis. When installing in the control cabinet, the main aspect that must be considered is thermal manage...
The TK-3 Proximity System Test Kit simulates shaft vibration and position for calibrating Bently Nevada monitors. It verifies the operating condition of the monitor readouts as well as the condition of the proximity transducer system. A properly calibrated system ensures that the transducer inputs and the resulting monitor readings are accurate.The TK-3 uses a removable spindle micrometer as...
The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet.The TDI resides in the slot adjac...
Decentralized control system is a new generation of instrument control system based on microprocessor, which adopts the design principle of decentralized control function, centralized display operation, taking into account division, autonomy and comprehensive coordination. The distributed control system is referred to as DCS, which can also be translated as "decentralized control system" or "distr...
The 3500 Transient Data Interface (TDI) is the interface between the 3500 monitoring System and the Bentley System 1TM machine management software. TDI combines the capabilities of 3500/20 Framework Interface Modules (RIM) and communication processors such as TDXnet. The TDI runs in the RIM slot of the 3500 frame and is used in conjunction with the M Series monitor (3500/40M, 3500/42M, etc.) to co...
1. By continuously comparing the current value of the machine vibration with the alarm value in the configuration, and driving the alarm system, so as to achieve the purpose of protecting the machine; 2.Provide vibration information of critical equipment for operators and maintenance personnel. Through configuration, each channel usually processes the input signal into a "static value". Each...
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN
+86 18965423501
sales7@amikon.cn
IPv6 network supported | Sitemap | XML | Blog | Privacy Policy | Terms And Conditions
